AutoDome Modular Camera System
Advanced Setup | en
13
Bosch Security Systems, Inc.
VG4-100 Series User’s Manual
F01U028033 | 1.0 | 2006.08
CAMERA ID Submenu
SYNC Submenu
DEFAULTS Submenu
Function
Selection(s)
Description
CAMERA ID
Selects submenu
To enter up to a 17-character camera name:
1.
Press the
Menu Select
key to enter the
Camera ID string.
2.
Enter up to a 17-character string name for
the camera.
3.
Use the
Up
and
Down
keys to select a charac-
ter.
4.
Use the
Left
and
Right
keys to change
position in the string.
5.
Press the
Menu Select
key to save and to
exit the character string.
6.
Exit the
Camera ID
menu.
ID POS
OFF, TOP, BOT
Use left or right keys to select:
OFF
: Camera ID not displayed.
TOP
: Camera ID displayed at upper left corner of
display.
BOT
: Camera ID displayed at lower left corner of
display.
(The camera ID is not displayed when the
OSD
menu is open.)
EXIT
Returns to the
INSTALL
menu.
Function
Selection(s)
Description
SYNC
INTERNAL, LINE LOCK
INTERNAL: Synchronizes the camera to an inter-
nal crystal. (default)
LINE LOCK: Synchronizes the camera to AC
power and eliminates picture roll in multi-camera
systems.
VPHASE
(0º to 358º)
Adjusts the vertical phase offset in
LINE LOCK
mode.
(Only active if a valid power supply frequency is
detected.)
Exit
Returns to the
INSTALL
menu.
Function
Selection(s)
Description
RESTORE ALL? NO, YES
Use the left or right keys to select:
NO
: To not change settings.
YES
: To restore all defaults. You receive a confir-
mation message.
Exit
Returns to the
INSTALL
menu.
