Bosch Rexroth VSB 40.1, Project Planning Manual

Page: 58 / 87

VSB 40.1 Maintenance and Installation
8-1
DOK-SUPPL*-VSB*40.1***-PR02-EN-P
8 Maintenance and Installation
8.1 General Information
VSB-type industrial PCs are maintenance-free. However, some
components are subject to wear and must be replaced (see chapter
"Wear parts" on page 4-4).
Include the following measures in the maintenance schedule:
•
At least once a year, check all plug and terminal connections for
proper tightness and damage. Check that cables are not broken or
crushed. Replace damaged parts immediately.
•
Check fan at least once a year.
DANGER
Risk of injury through rotating fan impeller!
⇒
Do not touch the fan impeller with your hands or
other objects.
•
Ensure that the VSB 40.1 is connected to a working uninterruptible
power supply unit.
Note: The accessories of Bosch Rexroth include uninterruptibe
power supplies for the 230 V supply as well as for the 24 V
supply (see chapter "Connection of the Uninterruptibe Power
Supply" from page 8-2 onwards).
8.2 CMOS Battery
The battery, with which RAM, BIOS and clock are buffered, has a limited
service life (see chapter "Wear parts" on page 4-4).
This lithium battery may not be changed by the user. The battery may only
be exchanged by the Bosch Rexroth Service (see chapter 14v "Service
und Support") or by personnel especially trained and authorized by the
Service.
WARNING
Batteries might cause fire, explosions or
chemical burn!
⇒
Do not load, remove, destroy, burn or heat batteries
over 100 C.
⇒
Dispose old batteries immediately and properly.
⇒
Keep away from children.
Maintenance