4-4
Technical Data
VAM 10.1 / VAM 40.1
DOK-SUPPL*-VAM*10/40**-PR02-EN-P
4.5 Used
Standards
The system components of the machine operator terminals VAM 10.1 and
VAM 40.1 correspond to the following standards:
DIN EN 61131-2
Programmable logic controllers
Part 2: Equipment requirements and tests
May 2003
DIN EN 61000-6-4
Electromagnetic compatibility (EMC)
Part 6-4: Special basic standard – Emitted
interference for the industrial area
Aug 2002
DIN EN 61000-6-2
Electromagnetic compatibility (EMC)
Part 6-2: Special basic standard – Noise immunity for
the industrial area
Aug 2002
DIN-EN-60529
Degrees of protection by the housing
Sep 2000
DIN EN -60204-1
Electrical equipment of machines
Part 1: General requirements
Nov 1998
Fig. 4-8:
Used standards
Note:
Concerning delivered VAM 10.1 and VAM 40.1 devices the CE
requirements are fulfilled.
The devices of the VAM family are certificated according to
•
UL508
(Industrial Control Equipment) and
•
C22.2 No. 14-M95
(CSA)
Note:
To guarantee an UL/CSA-compliant operation, you have to
fulfill the following conditions:
•
Use
60/75
°
C copper wire only.
•
Use Class 1 wire only or equivalent.
Note:
The UL/CSA marking is only valid for the device in its delivery
status. After having modified the device the UL compliancy
has to be verified.
4.6 Compatibility
Test
All Rexroth controls and drives are developed and tested according to the
latest state-of-the-art.
As it is impossible to follow the continuing development of all materials
(e.g. lubricants in machine tools) which may interact with our controls and
drives, it cannot be completely ruled out that any reactions with the
materials used by Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test
has to be carried out for new lubricants, cleaning agents etc. and our
housings/our housing materials.
CE Marking
UL/CSA Certification
