VAM 10.1 / VAM 40.1
Technical Data
4-3
DOK-SUPPL*-VAM*10/40**-PR02-EN-P
4.3
Machine Pushbutton and E-STOP
Vendor
Télémecanique (Schneider Electric)
Vendor's designation
Standard auxilary switch, NO contact
Standard auxilary switch, NC contact
(with forced opening)
LED module 24 V
ZBE-101
ZBE-102
ZBV-B1
Connection cross-section
Min. without connector sleeve
Max. without connector sleeve
1 x 0.22 mm²
2 x 1.5 mm²
LED module with rated voltage 24 V
ZBV-B1
Voltage range
AC
DC
21.6 V – 26.4 V
19.2 V – 30 V
Power consumption
Direct connection 24 V AC /´DC
18 mA
NO contact
ZBE 101
and NC contact
ZBE-102
according to IEC / EN 60947-6-1
~AC-15
240 V
120 V
3 A
6 A
=DC-13
250 V
125 V
0.27 A
0.55 A
For further information please refer to the data sheet of the vendor
Fig. 4-6:
Technical data for machine pushbutton and E-STOP
4.4 Ambient
Conditions
Operation
Storage
Abient temperature
(surrounding air temperature)
+5 °C to +55 °C
-25 °C to +70 °C
Relative humidity
10 % to 95 %, non-condensing
10 % to 95 %, non-condensing
Air pressure
Up to 2000 m above MSL
Up to 3,000 m above MSL
Degree of pollution
1
Maximum vibration
5 Hz to 9 Hz:
1,75 mm amplitude (permanently)
3,50 mm amplitude (occasionally)
9 Hz to 150 Hz:
0,5 g acceleration (permanently)
1,0 g acceleration (occasionally)
Maximum shock
15 g (occasional peak value above 11 ms, half sine wave)
Fig. 4-7:
Ambient conditions
