26/
56
Bosch Rexroth AG
Drive modules | RE 51150-B/07.11
Transport and storage
Carefully lift the drive module taking into consideration the stable center of
f
gravity location and transport it to the desired position.
Ensure that the control modules of the drive module do not come into contact
f
with the attachment devices during transport.
Carefully set the drive module down again and remove the attachment devices.
f
Transport by means of lifting gear and attachment points
6.1.4
The drive module can be transported by means of lifting gear in connection with
attachment devices, e.g. lifting strap or chain.
Make sure that the lifting capacity of the lifting gear and the attachment devic-
f
es is sufficiently dimensioned in order to safely bear the drive module's weight.
The weights of the drive modules are contained in table 16 in chapter 16 "Techni-
cal data".
For safe transport of the drive modules, a ring bolt can be screwed into the tapped
holes in the tank cover.
Tapped holes for ring bolt at the UPE2 (eyebolt)
Fig. 9:
Tapped hole for ring bolt
Tapped hole UPE2
