16/
56
Bosch Rexroth AG
Drive modules | RE 51150-B/07.11
Information on this product
Information on this product
5
Performance description
5.1
A drive module constitutes a complete drive system that is delivered ready for
connection. It is used for supplying hydraulic circuits with hydraulic fluid.
Product description
5.2
The drive module for which these operating instructions have been prepared is
exclusively intended for installation into machinery. This product has generally
been designed and manufactured to customer specifications. For the specific
description of your product, please refer to the relevant product-specific documen-
tation consisting of:
•
Technical specification: Description of the operating conditions and information
on the installation into the machinery
Hydraulic diagram: Function(s) and logic mode of operation of the product
•
Component list to the hydraulic diagram
•
Assembly drawing: Structural design, dimensions, connections, etc.
•
Drive modules according to these operating instructions at least consist of:
Electric motor and pump
•
Tank
•
Oil level display
•
Apart from that, drive modules may comprise:
Hydraulic control
•
Accumulator
•
Pump pressure limiting device
•
Additional protective devices to prevent unintended pressures
•
Additional equipment for recording defined operating conditions
•
(pressure, temperature, filling level, filter contamination)
Pipe / hose line, fittings, etc.
•
For reasons in connection with the thermal load, operate the drive module in
f
short-time operation, intermittent operation or continuous operation, depend-
ing on the type.
Select the duty cycle depending on the power output and the environmen-
f
tal conditions so that the maximum admissible operating temperature is not
exceeded.
Product-specific documentation
Basic elements
Extensions
