RE 07009-MON/11.17 | Assembly Instructions for Hydraulic Power Units
Bosch Rexroth AG
5/20
1 About this document
These instructions contain important information for the safe and appropriate
transport and assembly of hydraulic power units.
These are general assembly instructions with information on the transport of
hydraulic power units that are developed and produced in a customer-specific way.
Information on the commissioning (incl. the filling with operating media), the
operation, maintenance and simple troubleshooting is contained in the general
operating instructions for hydraulic power units and hydraulic assemblies.
2 General safety instructions
The hydraulic power unit was designed and manufactured considering the
provisions of directives, standards and specifications relating to this technology.
There is, however, still a risk of personal injury or damage to property if the
following safety instructions and warnings contained in this document are not
observed.
f
You should read these instructions completely and thoroughly before working
with the hydraulic power unit/hydraulic assembly.
f
Always include the operating instructions and the product-specific
documentation when passing the hydraulic power unit/hydraulic assembly on
to a third party.
2.1 Intended use
For information on the intended use please refer to the supplied general operating
instructions for hydraulic power units and hydraulic assemblies.
2.2 Qualification of personnel
Assembly requires a basic knowledge of mechanics, electrics and hydraulics,
as well as familiarity with the associated technical terms. In order to ensure
operational safety, these activities may only be carried out by qualified technical
personnel or an instructed person under the direction and supervision of a
qualified person.
Qualified personnel are those who can recognize potential hazards and apply the
appropriate safety measures due to their professional training, knowledge and
experience, as well as their understanding of the relevant conditions pertaining
to the work to be undertaken. Qualified personnel must observe the rules/laws
relevant to the specific subject area.
2.3 Safety instructions in this document
In these assembly instructions, there are safety instructions before the steps
whenever there is a risk of personal injury or damage to the equipment. The
measures described for preventing these hazards must be observed.
