6/20
Bosch Rexroth AG
Assembly Instructions for Hydraulic Power Units | RE 07009-MON/11.17
Safety instructions
are set out as follows:
Type of risk!
Consequences
f
Precautions
Warning sign (warning triangle):
Draws attention to the hazard
Signal word:
Identifies the degree of hazard
Type of risk:
Specifies the type or source of the hazard
Consequences:
Describes the consequences of non-compliance
Precautions:
Specifies how the hazard can be prevented
Table 1: Meaning signal words
DANGER!
Indicates an
imminently
hazardous situation which, if not
avoided, will certainly result in serious injury or even death.
WARNING!
Indicates a
potentially
hazardous situation, which, if not
avoided, could result in serious injury or even death.
CAUTION!
Indicates a
potentially hazardous
situation which, if not
avoided, could result in minor or moderate injury or damage
to equipment.
If this information is disregarded, it may result in machine
malfunction or breakdown.
Warning signs
Meaning
Warning of a danger spot
2.4 Adhere to the following instructions
• The regulations regarding accident prevention and environmental protection
applicable in the country where the product is used and at the workplace must
be observed.
• Only persons who have been authorized by the operator may be granted
access to the immediate vicinity of operation. This also applies during
machine standstill.
• Persons who assemble products supplied by Bosch Rexroth must not consume
any alcohol, drugs or medication that may have a detrimental affect on
their reactions.
•
Before installation, check the hydraulic power unit for visible transport damage
e.g. cracks, missing lead seals, screws, protective covers.
• Under no circumstances should the hydraulic power unit be subjected to
inadmissible mechanical loads. Do not place any objects on top of the power unit.
SIGNAL WORD!
General
Avoidance of hazards
