Bosch Rexroth Nexo Manual Download Page 208

Page: 208 / 279

208

/279

Bosch Rexroth AG

| Tightening Technology

3 608 870 A47

Nexo cordless Wi-Fi nutrunner

| 3 608 870 A47/2019-

9.8

Settings

The

Settings

menu contains the following menu items:

•

Time

date

age

208)

•

User accounts

(page

209)

•

Tool display

•

•

•

Firmware

(page

235)

•

PLC

signals

(page

236)

•

OK/NOK counter

(page

237)

•

Quality code

(page

238)

•

WLAN

•

•

•

ID assignment

•

•

Defaults

•

9.8.1

Time & date

Settings



Time & date

Select this menu item to define the date and time settings for the Nexo cordless Wi-Fi nutrunner and for
the operating system.

All tightening system outputs use the local time of the nutrunner. This also applies to outputs in the
operating system like actual values or graphs.

If the slide-in battery pack is not inserted, the local time of the nutrunner is supplied for one week.
Thereafter, the local time must be reconfigured.

Table 9–49:

Time & date tab

Element

Description

System time

Displays the current date and time setting of the Nexo cordless Wi-Fi
nutrunner.

Time zone

Is used to select the time zone.

PC time

Displays the current PC time.

Custom time

These values can be changed by directly entering numbers or by clicking the
buttons.

NTP server

The

NTP server

menu item allows setting the clock automatically via a time

server. In this case, the clock is periodically (each hour) synchronized with the
timeserver clock.

Save

Applies the selected setting as system time.

Summary of Contents for Rexroth Nexo
























































































































































































































































































Search results

Summary of Contents for Rexroth Nexo

Reviews:

Related manuals for Rexroth Nexo

Brands by name

Popular brands

Bosch Rexroth Nexo, Manual

Search results

Summary of Contents for Rexroth Nexo

Reviews:

Related manuals for Rexroth Nexo

Brands by name

Popular brands