Bosch Rexroth Nexo, Manual

Page: 228 / 279

228
/279
Bosch Rexroth AG
| Tightening Technology
3 608 870 A47
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-
9.8.4.5 VW-XML
Settings

Data

VW-XML
Use this menu item to define the setting for communication with VW-XML of the Nexo cordless Wi-Fi
nutrunner.
Table 9–74: VW-XML index card
Element Description
Active
If the check box is activated, communication with VW-XML is activated.
Protocol
Selection of the protocol:
– 2.1
– As of Nexo firmware version 1400:
2.0
LOG mask
As of Nexo firmware version 1400: LOG mask specification for internal
purposes (default setting: 63)
Drop enable
As of Nexo firmware version 1400: Options for the removal of the release
after loss of connection:
– never
– after connection lost
– after keep alive timeout
System data
Under
System data
, the corresponding parameters for
VM-XML tightening results output can be configured.
Tag default setting: empty
– System name <ABZ>
In the "ABZ" tag, 32 characters are available (e.g. wheel assembly).
– Plant <WRK>
In the “WRK” tag, 16 characters are available.
– Production segment <FSG>
In the “FSG” tag, 16 characters are available.
– Production section <FAB>
In the “FAB” tag, 16 characters are available.
– Production unit <FBR>
In the “FBR” tag, 16 characters are available.
– System location <ORT>
In the “ORT” tag, 16 characters are available.
– Assembly side <ABS>
Selection of the connection side:
– Left
– Clockwise
– Undefined: empty
In the “ABS” tag, one character is available. “R” for selection of
right
and “L”
for selection of
left
.