Bosch Rexroth MS2N, Operating Instructions Manual

Page: 95 / 124

6.2.12 Terminal boxes
Danger to life by high electric voltage!
WARNING
●
Follow the general installation and safety regulations when working on power
installations.
●
Before start-up, connect the protective conductors on all electric components
according to the connection plan.
●
Install the covers and guards provided for this purpose before switching on.
Lock all openings of the terminal box with dummy plugs and close the termi-
nal box with the intended terminal box lid.
●
Never touch electrical connection points of the components while power is
turned on.
Observe when connecting the terminal box:
●
Connect or disconnect clamp connections only in de-energized, dry and clean
state.
●
Connect the motor to reade-made connection cables.
●
Remove sScrew-type blank cap "X" at the cable entry side.
●
Select and tighten the cable gland according to the manufacturer´s details
about cable diameters.
●
The connections must be established such that a permanent safe electrical
connection is ensured.
●
Establish a safe protective conductor connection.
●
After connecting, lock all openings.
MS2N Synchronous Servomotors 73/101
Assembly
R911347581_Edition 04 Bosch Rexroth AG