Rexroth IndraMotion MLD
Preparation and Assembly
4-7
DOK-IM*MLD-F*STEP**V**-KB01-EN-P
When setting the IP address via IndraWorks, observe the following
points:
•
Switch on control voltage for IndraDrive controller
•
Start IndraWorks and establish serial communication with IndraDrive
Fig. 4-4:
Establishing the connection with IndraWorks
•
In IndraWorks open tree in project explorer window
•
Right-click "IndraDrive" (hardware level) in project explorer window
and open "Sercos III" in pull-down menu
Fig. 4-5:
IP address setting
•
In "TCP/IP Engineering Port" area parameterize desired IP address,
network mask and default gateway
Setting the IP Address via
IndraWorks
