Bosch Rexroth IndraControl VDP 16.1, Project Planning Manual

Page: 78 / 90

11-2
List of Figures VDP 16.1, VDP 40.1 and VDP 60.1
DOK-SUPPL*-VDP16/40/60-PR02-EN-P
Fig. 6-8: Key combinations of the keys VDP 16.1BK and VDP 40.1BI 6-7
Fig. 6-9: Key combinations of the keys VDP 16.1BK and VDP 40.1BI 6-8
Fig. 6-10: Keyboard telegram 6-8
Fig. 6-11: Status byte 6-9
Fig. 6-12: Assignment of the M-Keys at the PROFIBUS DP 6-9
Fig. 6-13: Key combinations for the keys of the VDP 60.1BL 6-10
Fig. 6-14: Key combinations for the keys of the VDP 60.1BL 6-11
Fig. 6-15: Code 0x10 to 0x1F 6-11
Fig. 6-16: Code 0x20 to 0x2F 6-11
Fig. 6-17: LED IN0 6-13
Fig. 6-18: LEDs for VDP1 and VDP2 6-13
Fig. 6-19: Meaning of the LEDs on the Y-Repeater 6-13
Fig. 7-1: Position of the interfaces 7-1
Fig. 7-2: Interfaces at the VDP 16.1, VDP 40.1 and VDP 60.1 7-1
Fig. 7-3: Rotary switch 7-1
Fig. 7-4: 24 VDC power supply X13 7-2
Fig. 7-5: USB interfaces XUSB1 and XUSB2 7-3
Fig. 7-6: Combined keyboard/mouse interface XPS2KB 7-4
Fig. 7-7: Mouse interface XPS2MS 7-5
Fig. 7-8: PROFIBUS DP interface 7-6
Fig. 7-9: Parameters for PROFIBUS DP line 7-6
Fig. 7-10: Maximum segment length in relation to the transmission rate
7-6
Fig. 7-11: Interface to the IPC 7-7
Fig. 7-12: Interface to the VDP displays 7-7
Fig. 7-13: Connection at the Y-Repeater 7-7
Fig. 7-14: Connection of the Y-Repeater 7-7
Fig. 7-15: Assignment of the three GIGASTAR interfaces 7-8
Fig. 7-16: Permissible cable length of the GIGASTAR interfaces 7-8
Fig. 7-17: Assignment of the digital 24 V input 7-9
Fig. 7-18: Pin assignment X21 7-9
Fig. 7-19: Selection of the active VDP 7-9
Fig. 7-20: Characteristic value of the digital 24 V input 7-9
Fig. 10-1: Type code VDP 16.1 10-1
Fig. 10-2: Type code VDP 40.1 10-2
Fig. 10-3: Type code VDP 60.1 10-3
Fig. 10-4: Y-Repeater 10-4
Fig. 10-5: Connecting cable to the IPC 40.2 10-4
Fig. 10-6: Storage media for the VDP 16.1, VDP 40.1 and VDP 60.1 10-4