Bosch Rexroth IndraControl VDP 16.1, Project Planning Manual

Page: 49 / 90

VDP 16.1, VDP 40.1 and VDP 60.1 Display and Operating Components
6-5
DOK-SUPPL*-VDP16/40/60-PR02-EN-P
6.2 Operating and Error Indication
In the upper part of the front panel there are 4 LEDs to indicate the device
states and errors. Depending on the variant the front panel provides
labeled LEDs or illuminated symbols. Start the measures specified in the
following table, if one of the succeeding LEDs indicates an error or a note.
Symbol /
LED Indicator Meaning Measure
LED
green Normal mode -
Power
LED OFF No supply voltage
230/115 VAC or 24 VDC Check supply voltage at
the power supply unit!
HDD
LED
yellow Hard disk access -
LED
green Temperature in the safe
range
Temp
LED red
flashing
Temperature > 50
°
C
Reduce ambient
temperature (surrounding
air temperature)!
Check fan at the PC!
LED OFF Normal mode -
LED red IPC is currently operating
in battery mode, i. e. no
power supply available! Restore power supply and
initiate controlled IPC
restart!
UPS
LED red
flashing Battery pack discharged,
defective or not connected Check battery pack!
Maintain the charging time
of 5 hours!
Fig. 6-5: LEDs to indicate operations and errors on the front panel
Note: Depending on the used industrial PC not all LEDs are
activated. Further information you will find in the respective
documentation of the IPC.