Bosch Rexroth IndraControl VDP 16.1, Project Planning Manual

Page: 16 / 90

2-2
Important Directions for Use VDP 16.1, VDP 40.1 and VDP 60.1
DOK-SUPPL*-VDP16/40/60-PR02-EN-P
Areas of Use and Application
The Displays VDP 16.1, VDP 40.1 and VDP 60.1 of Bosch Rexroth are
passive operator and visualization terminals, that represent in
combination with a display VDP 16.1, VDP 40.1 or VDP 60.1 a PC-based
machine operator terminal.
Note: VDP 16.1, VDP 40.1 and VDP 60.1 may only be used with the
accessories and parts specified in this document. If a
component has not been specifically named, then it may not
be either mounted or connected. The same applies to cables
and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware
as specified in the relevant function descriptions.
Typical applications of the VDP 16.1, VDP 40.1 and VDP 60.1 are:
•
Handling and assembly systems,
•
Packaging and foodstuff machines,
•
Printing and paper processing machines
•
Machine tools
•
Wood working machines.
The displays VDP 16.1, VDP 40.1 and VDP 60.1 may only be operated
under the assembly, installation and ambient conditions as described
here (temperature, system of protection, humidity, EMC requirements,
etc.) and in the position specified.
2.2 Inappropriate Use
Using the displays VDP 16.1, VDP 40.1 and VDP 60.1 outside of the
above-referenced areas of application or under operating conditions other
than described in the document and the technical data specified is
defined as “inappropriate use".
The Displays VDP 16.1, VDP 40.1 and VDP 60.1 may not be used, if
•
they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or
extremely high maximum temperatures or if
•
Bosch Rexroth has not specifically released them for that intended
purpose. Please note the specifications outlined in the general Safety
Guidelines!