Fig.1-1:
View of the UPS
1.2
Software
The communication between UPS and connected control cabinet PC occurs
via a serial interface (XCOM1). Therefore, the UPS software has to be installed
on the connected device. The installation is described in the documentation of
the control cabinet PC (see
chapter 1.3 "Further Documentation" on page
).
1.3
Further Documentation
The UPS belongs to the accessories of the VPP 21 devices that are described
in the the following documentations:
Rexroth Indra Control VPP 21.1
DOK-SUPPL*-VPP*21.1***-PR03-EN-P
Rexroth Indra Control VPP 21.2
DOK-SUPPL*-VPP*21.2***-PR01-EN-P
Fig.1-2:
Further documentation for permitted devices on the VAU 01.1Z
4/45
Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VAU 01.1Z | Project Planning Manual
System Presentation
