Bosch Rexroth IndraControl L10 Project Planning Manual Download Page 40

Page: 40 / 62

ordered separately). In addition, data and programs are stored to this card.

Operation without flash card is not possible.

It is only allowed to use Compact Flash cards of Bosch Rexroth.

DANGER

Operation without memory card causes uncontrolled movements!

Be sure not to remove the compact flash card as long as the

IndraControl L10 is in operation.

7.5

Inline Bus

To its right, the IndraControl L10 can be extended by additional Rexroth Inline

modules. Such modules permit an extension of the I/O unit to 16-byte inputs

and outputs.
The maximum number of Rexroth Inline modules that can be connected is 63.

For further information on the connection of Rexroth Inline modules,

please refer to /6/ "Automation terminals of the Rexroth Inline prod‐

uct family" (DOK-CONTRL-ILSYSINS***-AW..-EN-P, part number

911317021).

34/54

Bosch Rexroth AG | Electric Drives

and Controls

Rexroth IndraControl L10 | Project Planning Manual

Connections and Interfaces

Courtesy

CMA/Flodyne/Hydradyne

▪

Motion

Control

▪

Hydraulic

▪

Pneumatic

▪

Electrical

▪

Mechanical

▪

(800)

426-5480

▪

www.cmafh.com

Summary of Contents for Rexroth IndraControl L10































































Search results

Summary of Contents for Rexroth IndraControl L10

Reviews:

Related manuals for Rexroth IndraControl L10

Brands by name

Popular brands

Bosch Rexroth IndraControl L10, Project Planning Manual

Search results

Summary of Contents for Rexroth IndraControl L10

Reviews:

Related manuals for Rexroth IndraControl L10

Brands by name

Popular brands