8/60
Safety instructions
Bosch Rexroth AG
, A10VGT Series 11, RE 92770-01-B/11.2016
2 Safety instructions
2.1 About this chapter
The axial piston unit has been manufactured according to the generally accepted
rules of current technology. There is, however, still a danger of personal injury or
property damage if this chapter and the safety instructions in this documentation
are not complied with.
▶
Read this documentation completely and thoroughly before working with the
axial piston unit.
▶
Keep this documentation in a location where it is accessible to all users at
all times.
▶
Always include the required documentation when you pass the axial piston
unit on to third parties.
2.2 Intended use
Axial piston units are hydraulic components, meaning that in their application
area they are classified neither as complete nor as partly completed machinery in
the sense of the EC Machinery Directive 2006/42/EC. A component is exclusively
intended to form a partly complete machine or a complete machine together with
other components. The component may only be commissioned after it has been
installed in the machine/system for which it is intended and the safety of the entire
system has been established in accordance with the machinery directive.
This product is intended for the following use:
The axial piston unit A10VGT is only approved as a pump for hydrostatic drum drives
of concrete mixer trucks in a closed circuit. The pump has been specifically designed
and constructed for the load collectives in this particular application.
The performance data given is based on this load collective.
▶
Observe the technical data, the application and operating conditions and
the performance limits as specified in data sheet 92770 and in the order
confirmation. Information about approved hydraulic fluids can be found in
data sheet 92770.
The axial piston unit is only intended for professional use and not for private use.
Intended use includes having read and understood the complete documentation,
especially chapter 2 “Safety instructions” on page 8.
2.3 Improper use
Any use other than that described as intended use shall be considered as improper
and is therefore impermissible.
Bosch Rexroth AG is not liable for damages resulting from improper use. The user
bears all risks from improper use.
The following foreseeable faulty usages are also be considered to be improper
(this list does not claim to be exhaustive):
•
Use outside the operating parameters approved in the data sheet or in the order
confirmation (unless specifically approved by the customer)
•
Use of non-approved fluids, e.g. water or polyurethane components
•
Changes to factory settings by unauthorized persons
