Bosch Rexroth A10VGT, Instruction Manual

Page: 3 / 60

3/60
RE 92770-01-B/11.2016, A10VGT/A10VGT Series 11, Bosch Rexroth AG
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Display of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 7
1.3.3 Designations 7
1.3.4 Abbreviations 7
2 Safety instructions 8
2.1 About this chapter 8
2.2 Intended use 8
2.3 Improper use 8
2.4 Personnel qualifications 9
2.5 General safety instructions 10
2.6 Product-specific safety instructions 11
2.7 Personal protective equipment 14
3 General instructions on damage to property and the product 15
4 Scope of delivery 18
5 About this product 19
5.1 Performance description 19
5.2 Product description 19
5.2.1 Layout of the axial piston unit 19
5.2.2 Functional description 20
5.3 Product identification 21
6 Transport and storage 22
6.1 Transporting the axial piston unit 22
6.1.1 Transporting by hand 22
6.1.2 Transporting with a lifting device 22
6.2 Storing the axial piston unit 24
7 Installation 26
7.1 Unpacking 26
7.2 Installation conditions 26
7.3 Installation position 28
7.3.1 Below-reservoir installation (standard) 28
7.3.2 Above-reservoir installation 29
7.4 Installing the axial piston unit 30
7.4.1 Preparation 30
7.4.2 Dimensions 30
7.4.3 General instructions 31
7.4.4 Installation with coupling 31
7.4.5 Installation on a gearbox 32
7.4.6 Installation with cardan shaft 33
7.4.7 Completing installation 33
7.4.8 Changing the lever position of the HW control 34
7.4.9 Hydraulically connecting the axial piston unit 35
7.4.10 Electrically connecting the axial piston unit 39
7.5 Performing flushing cycle 40
Contents