Bosch R911172765, Operating Instructions Manual

Page: 9 / 36

CAUTION
In case of non-compliance with this safety instruction, minor or moderate injury
can occur.
NOTICE
In case of non-compliance with this safety instruction, material damage can
occur.
3.3 Symbols used
Pointers are displayed as follows:
This is a note.
Tips are displayed as follows:
This is a tip.
3.4 Explaining the signal alert symbol on the device
krax
If this symbol is on your device, you have to observe the documentation
on the device. The respective documentation informs on the type of
hazard as well as the steps required to avoid this hazard.
4 Intended use
The SafeLogic compact Sercos Gateway can only be operated in connection with
a SafeLogic compact system. The firmware version of the connected SafeLogic
compact CPUx has to have at least V2.0.0. The version of the configuration
software SafeLogic Designer has to be at least 1.4.0. The SafeLogic compact
Sercos Gateway supports Sercos in the third generation.
Sercos Gateway Bosch Rexroth AG
Intended use
DOK-CONTRL-SLC*GW*GS3S-IT03-EN-P
5/31