Bosch R911172765, Operating Instructions Manual

Page: 27 / 36

●
Error messages can be displayed in the "Diagnostics" standard
view of the SafeLogic compact Designer if you are connected to
the SafeLogic compact system.
●
For information on how to perform diagnostics see the "Rexroth
IndraControl SafeLogic compact Designer Software" operating
instructions, chapter "Diagnostic view", see tab. 1-2 "Required
and supplementing documentation" on page 2 .
●
Error displays and troubleshooting are described in detail in the
project planning manual "Rexroth IndraControl SafeLogic compact
Sercos Gateway", see tab. 1-2 "Required and supplementing
documentation" on page 2 .
Do not open the housing!
Do not open the housing of the SafeLogic compact Sercos Gateway!
14 Maintenance
14.1 Cleaning notes
The SafeLogic compact Sercos Gateway is
damaged when using solvents!
NOTICE
Do not use any solvents (e. g. diluents)!
14.2 Maintenance notes
The SafeLogic compact Sercos Gateway does not have to be maintained. The
following needs to be checked at least annually at the SafeLogic compact Sercos
Gateway:
●
The correct position
●
The correct cabling (shielding and securing of Sercos cables)
●
Damage or rupture of the housing
●
The tight screw connection of the end brackets on the left and right of the
control
Replace the SafeLogic compact Sercos Gateway immediately when damaged.
15 Ordering information
15.1 Accessories and spare parts
For ordering information on accessories and spare parts, refer to chapter 5
"Spare parts and accessories" on page 8 .
Sercos Gateway Bosch Rexroth AG
Ordering information
DOK-CONTRL-SLC*GW*GS3S-IT03-EN-P
23/31