manualshive.com logo in svg

Bosch PRAESENSA, Manual

Share
Download
Bosch PRAESENSA Manual Download Page 60

60

en | Installation wiring

PRAESENSA

2021.12.21 | V0.15b | F.01U.402.882

Underwriters Laboratories Listing Document (ULLD)

Bosch Security Systems B.V.

Mounting on the shelf

i

Notice!

The USMG‑114 utility shelf of the firm Lowell is UL‑certified and supports the required
mounting procedure.

To do so:

1.

Part of the mounting plate of the end‑of‑line device can be broken off (1) and snapped in
place as bottom plate (2+3).

2.

From the bottom‑side of the shelf, put two mounting screws through the shelf mounting
holes and the EOL board holes, as indicated.

3.

Add two nuts to the top‑side of the screws and EOL board, and tighten:
–

Tighten the nuts with a maximum force of 0.7 Nm, until the EOL device fits correctly
in place (

WARNING

: tighten with too much force could damage the EOL board!).

4.

Repeat previous steps for all EOL devices to install.

Summary of Contents for PRAESENSA







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands