Bosch PRAESENSA Manual Download

Page: 108 / 166

108

en | Installation wiring

PRAESENSA

2021.12.21 | V0.15b | F.01U.402.882

Underwriters Laboratories Listing Document (ULLD)

Bosch Security Systems B.V.

3.12

First responder panel | PRA-FRPx-US, PRA-FRPx-USNY

–

The PRA-FRP1-US comes standard with one LCD call station and one call station
extension.

–

The PRA-FRP2-US comes standard with one LCD call station and two call station
extensions.

–

The PRA-FRP3-US comes standard with one LCD call station (PRA-CSLW), and three call
station extensions (PRA-CSE ).

–

In case of loss, a key (code 1358) for the PRA‑FRPx‑US can be ordered at Bosch with
ordering code D102.

There are three New York versions of the First responder panels that have a specific lock on
the door.
–

The versions are PRA-FRP1-USNY, PRA-FRP2-USNY, and PRA-FRP3-USNY.
–

In case of loss, a key for the PRA‑FRPx‑USNY can be ordered at a local distributor
with code 2642 NYC fire key.

Please note that the use of red colored enclosures may be mandated by the local codes/AHJ.
See

LCD call station | PRA-CSLD, PRA-CSLW, page 83 and Call station extension | PRA-CSE,

page 91 for more detailed information.

Summary of Contents for PRAESENSA







































































































































































Search results

Summary of Contents for PRAESENSA

Reviews:

Related manuals for PRAESENSA

Brands by name

Popular brands

Bosch PRAESENSA, Manual

Search results

Summary of Contents for PRAESENSA

Reviews:

Related manuals for PRAESENSA

Brands by name

Popular brands