NetDVR
| User’s Guide | Configuring the NetDVR
30
Bosch Security Systems | 2004-01
•
If the motion detect ‘MD’ or a sensor (S1~S4) check box is selected, the image is
recorded on the HDD with the 'Alarm Save’ setting, when that device triggers the alarm.
•
Select the event devices for each of the five Time Table sections.
3.10.7 Quality Box
The quality box allows for selecting the area of
interest to full image quality (focus area) while
the remainder of the image is reduced in
contrast to reduce the amount of data to be
stored or transmitted.
•
Click on the large button to open the
Quality Box configuration window.
•
A quality box is configured by drawing a
rectangular area in the image.
•
Move the mouse over the border and click
to resize or move inside the QBOX, click
and move the box.
•
To clear a configured quality box, click the
mouse button out of selected area.
•
Set the 'Attenuation level’ (1 to 5) to
determine the contrast of the image outside
the ‘focus area’.
Note:
Selecting attenuation level ‘1’ means the contrast level outside the ‘ focus area’ is almost the same as that
within the ‘focus area’. Selecting level ‘5’ means the image outside the ‘focus area’ is dark.
•
Click on the OK button to enter the quality box settings.
•
Check the quality box checkboxes for the time zones as required.
Click on the OK button to confirm the settings and return to the ‘Schedule’ main screen
NetDVR.book Page 30 Wednesday, May 12, 2004 4:06 PM
