Bosch Security Systems | 2004-01
NetDVR
| User’s Guide | Configuring the NetDVR
29
Note:
Repeat for each channel to configure all relevant schedules. Each channel can have its own timetable.
3.10.3 Time Table
•
A day can be divided into 5 time zones
between 0:00 and 24:00. If you configure
the first time zone to be only part of a full
day, the following time zone will be
activated. Note that zone 5 automatically
fills in the remainder of the day.
3.10.4 Normal Save
Normal Save defines recording parameters for
normal (not event-triggered) recording as
follows:
•
Set the ‘frame rate’ using the pull-down list
(the higher the rate, the less ‘jumpy’ the
picture).
•
Set the ‘resolution’ using the pull-down list
(the higher the resolution, the more detail
that is visible).
•
Set the ‘quality’ (compressing rate) using
the pull-down list (choosing lower image
quality results in a higher compression rate
and smaller file size).
3.10.5 Alarm Save
Event Save defines the recording parameters for an event-triggered situation as follows:
•
Set the ‘frame rate’ using the pull-down list (the higher the rate, the less ‘jumpy’ the
picture).
•
Set the ‘resolution’ using the pull-down list (the higher the resolution, the more detail
that is visible).
•
Set the ‘quality’ (compressing rate) using the pull-down list (choosing lower image
quality results in a higher compression rate and smaller file size).
3.10.6 Alarm Trigger
The alarm trigger defines which events trigger the 'Alarm Save’ function. The Relay Output
trigger schedule is setup in the Relay Setup screen.
NetDVR.book Page 29 Wednesday, May 12, 2004 4:06 PM
