Bosch NetDVR User Manual Download

Page: 11 / 52

Bosch Security Systems | 2004-01

NetDVR

| User’s Guide | Installation

Installation

2.1 Installation summary

Installation of the NetDVR consists of the following basic steps:

•

Connect the NetDVR onto a local Ethernet network and connect power.

•

Install the NetDVR software on a PC.

•

Configure the Administrator’s settings.

•

Configure the recording and search options.

•

Mount the NetDVR in the correct location and re-connect the power and Ethernet.

•

Connect the external cameras.

Installation details are given in the following paragraphs:

2.1.1 System requirements

For NetDVR you need:

•

Network: 10 Base-T LAN.

For a PC to access NetDVR:

•

CPU: Pentium II or above

•

Minimum free RAM: 64MB

•

Operating system: Windows 98, 2000, ME, NT4 or XP

•

Network interface card: 10 base-T or dual speed 10/100 base-T with TCP/IP enabled.

•

16 MB video memory or more.

2.1.2 Recommended PC display settings

Using the Windows ‘Setting / Control Panel / Display’ options:

•

Set color option to ‘High color (16-bit)’ or above.

•

Set screen resolution to 1024x768 pixels (minimum).

2.1.3 Connecting Ethernet and power cables

•

Connect an Ethernet LAN cable to the ‘Ethernet’ port (RJ-45 connector) on the rear
panel.

•

Connect the power supply (12V, 3.5A adaptor, supplied) to the connector marked ‘DC
12V’.

•

Confirm that the green LED on the Ethernet port flashes every 1 to 2 seconds. Note that
it starts flashing 5 to 6 seconds after applying power.

NetDVR.book Page 11 Wednesday, May 12, 2004 4:06 PM

Summary of Contents for NetDVR





















































Search results

Summary of Contents for NetDVR

Reviews:

Related manuals for NetDVR

Brands by name

Popular brands

Bosch NetDVR, User Manual

Search results

Summary of Contents for NetDVR

Reviews:

Related manuals for NetDVR

Brands by name

Popular brands