MIC IP fusion 9000i
Installing a MIC Camera on a Hinged DCA | en
33
Bosch Security Systems
Installation Manual
2022-09 | 1.6 | F.01U.334.820
M25
3/4” NPT
4X
9.0
24 VAC / RS-485
RJ45
Cat5e/Cat6
Shielded
Twisted Pair
(STP)
1. Attach the DCA to the mounting location using user-supplied hardware (item 1). (Bosch
recommends stainless steel bolts and washers.)
2. Attach user-supplied conduit or glands to the side hole or to the bottom hole. If applicable,
use the conduit adapter (male M25 to female ¾ in. NPT) (item 2, included with the DCA).
3. Route cables into the DCA (item 4), either through the bottom or from the side.
4. Use the blanking plug and O-ring (item 3, included with the DCA) to close the unused hole
(bottom or side) in the DCA.
5. Insert the O-ring (item 1).
6. Loosen the Torx bolts two (2) turns (items 2). Slide the hook up (item 3). Tighten the bolts
to hold the hook in place temporarily (item 4).
