Bosch MIC-7130-PB4 Operation Manual Download Page 68 | Manualshive

Page: 68 / 122

background image

68

en | Recording

MIC IP starlight 7000 HD

2016.07 | 5.0 | F.01U.291.520

Operation Manual

Bosch Security Systems

17

Recording

17.1

Storage Management

You can record the images from the camera on an appropriately configured iSCSI system.
It is also possible to let the VRM Video Recording Manager control all recording with accessing
an iSCSI system. This is an external program for configuring recording tasks for video servers.
For further information please contact your local customer service at Bosch Security Systems
Inc.

17.1.1

Device manager

An external Video Recording Manager (VRM) system for the unit is configured via the
Configuration Manager. The

Managed by VRM

box is only an indicator; it cannot be changed

here.
If the

Managed by VRM

box is checked, you are not able to configure any further recording

settings on this page.

17.1.2

Recording media

Select a media tab to connect to the available storage media.

iSCSI Media

To use an

iSCSI system

as the storage medium, a connection to the desired iSCSI system is

required to set the configuration parameters.
The storage system selected must be available on the network and completely set up. It must
have an IP address and be divided into logical drives (LUNs).
1.

Enter the IP address of the required iSCSI destination in the

iSCSI IP address

field.

2.

If the iSCSI destination is password protected, enter the password into the

Password

field.

3.

Click

Read

.

–

The connection to the IP address is established.

The

Storage overview

field displays the logical drives.

Local Media

An SD card inserted in the camera can be used for local recording (not available on some
cameras).

4

If the SD card is password protected, enter the password into the

Password

field.

The

Storage overview

field displays the local media.

Note:

SD card recording performance is highly dependent on the speed (class) and performance of
the SD card. An SD card of Class 6 or higher is recommended.

17.1.3

Activating and configuring storage media

Available media or iSCSI drives must be transferred to the

Managed storage media

list,

activated, and configured for storage.

Note:

A iSCSI target storage device can only be associated with one user. If a target is being used by
another user, ensure that the current user no longer needs the target before decoupling that
user.

«
...
66
67
68
69
70
...
»

Summary of Contents for MIC-7130-PB4



























































































































Reviews:

No comments

Related manuals for MIC-7130-PB4

Brand: D-Link Pages: 4

Brand: SAA Asia Limited Pages: 76

Brand: B-Cam Pages: 13

Brand: Banner Pages: 98

Brand: NELLYS SECURITY Pages: 15

Brand: Zonet Pages: 58

Brand: ZKTeco Pages: 2

Brand: ZKTeco Pages: 5

Brand: Digisol Pages: 18

Brand: Neptune Pages: 35

Brand: Kidde Pages: 10

Brand: Clas Ohlson Pages: 44

APO-SUMMICRON-M 50 mm f/2 ASPH.

Brand: Leica Pages: 8

Brand: PNI Pages: 20

Brand: Aigis Mechtronics Pages: 20

VARES ESC-006 A

Brand: RCS AUDIO-SYSTEMS Pages: 16

Mini Speed Dome Camera

Brand: Optiview Pages: 31

Brand: NA-DE Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands