MIC IP starlight 7000 HD
Camera | en
57
Bosch Security Systems
Operation Manual
2016.07 | 5.0 | F.01U.291.520
16.6
Picture Settings
Current mode
Select one of the pre-programmed user modes, optimized with the best settings for a variety
of typical applications, that best defines the environment in which the camera is installed.
–
General: Default mode. Suitable for most applications.
–
Motion: Optimized to minimize motion artifacts, such as when monitoring traffic or fast-
moving objects.
–
Low light: Optimized performance for scenes with low light level.
–
Indoor: Optimized for scenes with indoor lighting, and avoids the limitations imposed by
the sun or street lighting.
–
Vibrant: Provides enhanced contrast, color reproduction, and sharpness.
–
Illuminator: Optimized performance when using the MIC illuminator accessory.
Customize the mode, if necessary, for the specific requirements of the site by selecting
different values for the fields below.
In this case, the name of the user mode changes to “Custom.”
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
–
ATW
: allows the camera to continuously adjust color reproduction.
–
AWB Hold
: places the ATW on hold and saves the color settings.
–
Extended ATW
(default): allows the camera to constantly adjust for optimal color
reproduction.
–
Manual
: Red and Blue gain can be manually set to a desired position.
–
Sodium Lamp Auto:
Automatically adjusts for sodium vapor light to restore objects to
their original color.
–
Sodium Lamp:
Optimizes the sodium vapor light to restore objects to their original color.
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Sodium red level
Adjust the level of red for sodium vapor lighting with the slider from 0 to 255.
Sodium blue level
Adjust the level of blue for sodium vapor lighting with the slider from 0 to 255.
Note: The fields
Sodium red level
and
Sodium blue level
appear only when the value in the
field
White balance
is “Sodium lamp auto” or “Sodium lamp.”
Saturation
The percentage of light or color in the video image (HD only). Values range from 60% to 200%;
the default is 110%.
Color hue
The degree of color in the video image (HD only). Values range from -14° to 14°; the default is
8°.
Intelligent DNR
Select
On
to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
