EN | 46
Bosch Security Systems | December 13, 2005
Lock or Unlock Control of a Monitor
•
When using IntuiKey keyboards, press [
Device Lockout]
, located on the main
Allegiant menu screen for these options.
•
With LTC 8555 Series keyboards, press
[Monitor], [Lock]
, then
[ON]
to lock a
monitor or
[OFF]
to unlock the monitor. If the monitor to be unlocked is not the
one currently being controlled by the keyboard, enter the monitor number (but
do not press
[Enter]
) after you press
[Monitor]
.
If the Status option is enabled, the section of the on-screen overlay between the
camera number and the time shows
M
L
indicating the monitor is locked. This status
prevents other operators from changing the video on the monitor being used (unless
they have a higher priority). Remember to unlock the monitor when finished so
other operators can access it. If an operator with a higher priority accesses a locked
monitor and switches to a different camera, the lock is automatically removed.
Recording a Camera Pre-position Scene
Select a camera with pan/tilt/zoom control and with preposition options. Using the
joystick and lens controls, adjust the camera to view the scene you wish to store.
When using IntuiKey keyboards, press [
Camera Control]
, located on the main Alle-
giant menu screen to enter a menu screen with this option. Press
Set Shot [Set]
,
then select the scene number via the numeric keypad, and press
[Enter]
. The camera
position is stored for recall later.
If an AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
If an Allegiant conventional receiver/driver is being controlled, the pan/tilt and
zoom lens must have the necessary options for pre-position operation. On certain
models of AutoDomes and Allegiant Receiver/Driver Series, it is possible to disable
a previously stored pre-position, or remove it from a pre-position tour, by pressing
Set Shot [Set]
, the digit
9
, followed by the 2-digit pre-position number. Refer to
information supplied with the device to determine if it supports this feature.
NOTE
Alarm activations are defaulted to call preposition scene 16.
Recalling a Camera Pre-position Scene
Select the camera to be activated. Press
Shot
, enter a previously stored camera posi-
tion number via the numeric keypad, then press
[Enter]
. The camera automatically
returns to the previously stored position. If a second pre-position is called prior to
the completion of the first, the camera will move directly to the second shot.
If the AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
Activate/Deactivate Auxiliary Function
When using IntuiKey keyboards, press [
Camera Control]
, on the main Allegiant
menu screen to enter a menu containing these options. To turn on an auxiliary func-
tion of a remote camera device, press
Aux ON [ON]
, enter the number of the auxil-
iary you would like to activate and then press
[Enter]
. Holding the
[Enter]
key down
causes the auxiliary function to be sent repeatedly. This capability is useful when the
auxiliary is activating a housing window washer function, or a temporary light
source.
Summary of Contents for LTC 8016/90
