Bosch LTC 8016/90, Instruction Manual

Page: 49 / 104

User Priority Access Table
EN | 39
is shipped from the factory. Once a user is logged into the system, the password can
be changed using the keyboard (see User Function number 10). Refer to the specific
section of the operation instructions for exact procedures of using keyboard User
Functions. Although the table indicates 32 possible users, only eight (8) keyboards
are supported in LTC 8500 Series systems.
14.2 User Priority Access Table
The following table shows system function access as it applies to the eight (8) levels
of users.
Priority Level
System Function 1 2 to 7 8
Switch video on monitors Yes Yes Yes
Control pan/tilt/zoom camera Yes Yes Yes
Lock monitor Yes Yes Yes
Lock pan/tilt/zoom camera Yes Yes Yes
Acknowledge alarms Yes Yes Yes
Perform keyboard test Yes Yes Yes
Show keyboard number Yes Yes Yes
Activate keyboard beeper Yes Yes Yes
Change user password Yes Yes Yes
Program sequences Yes Yes No
Position video overlay display Yes Yes No
Set overlay display brightness Yes Yes No
Select overlay display type Yes Yes No
Set system time/date Yes Yes No
Program pre-positions Yes Yes No
Set time/date format Yes No No
Set camera and monitor titles Yes No No
Enable time events Yes No No
Reset system Yes No No
Printout tables and sequences Yes No No
Default monitor overlay Yes No No
Select alarm response mode Yes No No
Select printer mode Yes No No
Designate alarm monitor type Yes No No
Select keyboard log-in Yes No No
Select console log-in Yes No No
Configure/reset RS-232 ports Yes No No