manualshive.com logo in svg

Bosch Integral TM13, Operating Instructions Manual

Share
Download
Bosch Integral TM13 Operating Instructions Manual Download Page 53

A

/

FULL

e.g.

JONE

e.g.

Using the phone in a partner group

53

Using the phone in a partner group

Your BOSCH TELECOM service representative can connect up to 8 telephones to
form a partner group. A number of functions are particularly easy to use within this
partner group. 
The display provides you with information on the activities of every partner.

Information on the partner display

"

Your partner has activated a call diversion.

A

A call diversion to this partner has been activated.

A

Partner display or partner beep has been activated.

or 

This symbol only appears while you are setting up the partner beep!
Select 

A

 if you prefer normal ringing or 

A

 if you prefer the alerting tone.

Flashes alternately with partner display: Partner is called.

Flashes alternately with partner display: Partner for whom a call diversion
was activated is called.

Flashes alternately with partner display: Partner is called by two different
parties simultaneously.

Partner is making a call.

Flashes alternately with partner display: Partner is busy and receives addi-
tional call.

Calling partners

Press the desired partner key.

Dial.

The call number is dialed.

Answering a call for a partner

A partner phone rings. The corresponding
partner display flashes.

Press the partner key.

The call is diverted to your phone. It rings. 
You can now accept the call.

1234 BERT 11.11.94 16:50

↓

FULL MEYE MILL EDDI JACK

SAMM

GARA GAIL AIRP

Summary of Contents for Integral TM13



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands