manualshive.com logo in svg

Bosch Integral TM13, Operating Instructions Manual, Page: 28 / 146

Share
Download
Bosch Integral TM13 Operating Instructions Manual Download Page 28

–

Making calls

28

Dialing call numbers from the call list

The call list resumes all calls from one subscriber in one entry. Messages and di-
verted calls are listed sepearately even if they proceed from the same subscriber.
Moreover, you can directly store a call number of the call list in the telephone book.

Dialing a number from the call list

The message “List” appears on the display.
This indicates that the call list contains new
entries.

Select the menu item “Display call list”. 

The current entries are displayed.

Press the “Arrow down” key to scroll
through the existing entries.

If you wish to know more about a specific
entry, select the caller, e.g. ”Bert”.

Additional information about this entry is
shown on the display.

Calling back a subscriber:

Dialing.

 The call number of the selected

subscriber is dialed automatically. When he
answers you can make your call as usual.

While you are calling the subscriber the
date and time of his last call are shown on
the display.

Notes: 
The entry is automatically deleted from the
call list as soon as you have called the
subscriber back.

The message „List“ appears on the display
in the idle mode until you have scrolled
through all new entries.

Menu

'

Display call list

Call list

Entries 3 

↓

  BERT

01:36  3

 NICHOLLS

07:00 +2

  BERT

01:36

3

Call number: 0691234567

Name:

BERT

Count:

3

28.04.95 01:36 

BERT 0691234567

Summary of Contents for Integral TM13



















































































































































Reviews:

No comments