B
C
If in doubt, look it up
113
Menu items on the display
"
Your telephone has been factory-set so that while connected all key de-
pressions can be sent as tones. You can also turn off this function and
initiate the postdialing manually while connected.
(only TH and TM) With this you can additionally adjust the setting for hands-
free talking to room conditions. Your telephone must be designed with the
comfort handsfree equipment for this. If necessary, consult your BOSCH
TELECOM Service.
Here you can define the baud rate of your telephone for data transmission.
Available values are 1200, 2400, 4800 and 9600.
This menu item only appears if you have set the AEI mode of operation to
”AT command”.
If a called party is busy, you can program your phone to transmit a signal as
soon as the line is free again. Your phone and the phone of the previously
busy subscriber then ring and you can set up the call.
However, this is only possible for calls within your system. You can request
several callbacks.
You can divert calls to other telephones, even external ones. If you receive
a diverted call, the caller‘s name appears on your display if it is stored in
your local telephone book.
You can activate or deactivate the call list.
Enter the external line code that is entered in the call list with your calls.
Enter the external code that you normally use for external calls.
Autom. post dialing/DTMF
(
p. LEERER MERKER)
Balancing handsfree calling
-
〈→
p. 135)
Baud rate AT
Callback
Call diversion
Call list
Call list: ELC in
Call list: ELC out
