manualshive.com logo in svg

Bosch Integral TM13, Operating Instructions Manual

Share
Download
Bosch Integral TM13 Operating Instructions Manual Download Page 130

If in doubt, look it up

130

Setting tones and distinctive rings on your phone

In addition to the ringing tone, your phone has a number of acoustic signals that
inform you of various telephone procedures.
You can listen to and adjust almost all of the tone settings in the menu “Audio/con-
trast” (

→

 p. 83).

Tones for internal and external calls

Normal ringing tone for external calls:
You can turn off this ringing tone. 
 (

→

 p. LEERER MERKER).

Normal ringing tone for internal calls:
You can turn off this ringing tone. 
(

→

 p. LEERER MERKER).

Special information signal:
Additional call during an existing call, 
partner beep.

Executive call:
VIP function, you can turn off this ringing
tone (

→

 p. LEERER MERKER).

Call with “Handsfree answer back”: 
Announcement (with answer also), 
Message on busy: special tone.

Tones in the receiver

Tone during a cut-in call.

Signal tone:
when the loudspeaker, handsfree mode
and on-hook dialing are activated. This
tone is also heard by the remote sub-
scriber. 

Summary of Contents for Integral TM13



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands