manualshive.com logo in svg

Bosch Integral TM13, Operating Instructions Manual

Share
Download
Bosch Integral TM13 Operating Instructions Manual Download Page 124

P

If in doubt, look it up

124

Menu items on the display

"

This function permits you to adjust the sensitivity for the handsfree mode to
better adapt it to the surroundings. The best is to use the lowest possible
setting.
If your telephone is equipped with a deluxe handsfree unit you can also use
this function to vary the echo and the amplification. A higher level results in
an amplification of the microphone signal. If required please contact your
BOSCH TELECOM Service.

Assignment: You can store your own call number so that it is shown on the
display.

This option permits you to define the parity for the control of your telephone.
Available settings are ”None”, ”Even” and ”Odd”.
It only appears if the AEI mode of operation has been set to ”AT command”.

You can switch your phone in and out of a hunt group. This function must
be enabled by your BOSCH TELECOM service representative.

Set the partner functions and partner display as you wish.

To activate call duplication for partners.

To deactivate a partner diversion.

Partner diversion: You are asked whether this diversion should be deleted.

You can pick up calls for other users on your telephone. Enter the call num-
ber and then select the menu item.

Outgoing sensitivity 

-

Own call number

Parity (AT)

Part of group

Partner

Partner beep on

Partner div. off

Partner div. 212 to 243

Pick up a call

Summary of Contents for Integral TM13



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands