Bosch HXU09AH50A, User Manual And Installation Instructions

Page: 13 / 52

Familiarising yourself with your appliance
en
13
Temperature and setting levels
There are different settings for the types of heating and functions.
Symbol Function Use
​⁠ Zero setting The appliance does not heat up.
50–275 Temperature range Set the temperature in the cooking compartment in °C.
1, 2, 3
or
I, II, III Grill settings Depending on the appliance type, set the grill settings for the grill, for the large
area and grill, or for the small area.
1 = low
2 = medium
3 = high
Gas hob selector
The gas hotplate selector is used to set the heat set-
ting for the hotplates.
Position Function Explanation
Zero setting The hotplate is switched off.
Ignition position All the igniters ignite at the same time.
Settings range Large flame = highest setting
Small flame = lowest setting
There is a limit stop at the end of the settings range.
Do not turn the gas hotplate selector beyond the end
stop.
5.4 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Rails
The rails in the cooking compartment enable you to
place accessories at different heights.
The cooking compartment has five shelf positions. The
shelf positions are numbered from bottom to top.
You can remove the rails, e.g. for cleaning.
→
"Rails", Page 21
Self-cleaning surfaces
The back panel in the cooking compartment is self-
cleaning. The self-cleaning surfaces are coated with a
porous, matte ceramic layer and have a coarse sur-
face. When the appliance is in operation, the self-clean-
ing surfaces absorb splashes from roasting or grilling
and break them down.
If the self-cleaning surfaces no longer clean themselves
adequately during operation, heat up the cooking com-
partment specifically to the right temperature.
→
"Cleaning self-cleaning surfaces in the cooking com-
partment", Page 20
Lighting
The oven light lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. If you use the function se-
lector to end the operation, the lighting switches off.
The oven light setting on the function selector can be
used to switch on the light without heating.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
ATTENTION!
Do not cover the ventilation slot above the appliance
door. The appliance overheats.
▶
Ensure that the ventilation slots are unobstructed.
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Appliance door
If you open the appliance door during operation, the
operation continues.
Condensation
Condensation can occur in the cooking compartment
and on the appliance door when cooking. Condensa-
tion is normal and does not adversely affect appliance
operation. Wipe away the condensation after cooking.