HND 300|
User Manual
5 |
20
Data subject to change without notice
English
Safety Notes
Digital Inspection Camera
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Have the inspection camera repaired only through a qualified repair person and only using identical replacement parts. Doing this
will ensure that the safety of the inspection camera is maintained.
Do not operate the inspection camera in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Sparks can be created in the inspection camera which may ignite the dust or fumes.
Before any work on the inspection camera itself (e.g., assembling, maintenance, etc.) as well as when transporting and storing,
remove the battery from the inspection camera.
Protect the batteries against heat, continuous intense sunlight, fire, water, and moisture. Do not direct the light beam at persons or
animals and do not stare into the light beam yourself (not even from a distance).
Check the working range before using the inspection camera.
No part of the inspection camera may come in contact with electrical lines, moving parts or chemical substances. Interrupt the
power circuit of electrical lines in the working range. These measures reduce the risk of explosion, electrical shock, and property
damage.
Wear appropriate protective equipment such as safety glasses/goggles, protective gloves or respirator when materials that are
hazardous to one’s health are in the working range.
Sewer lines or similar areas can contain solid, liquid or gaseous substances, which may be toxic, infectious, caustic or otherwise
hazard to one’s health.
Pay particular attention to cleanness when working in areas with substances that are hazardous to one’s health. Don’t eat during
work. Avoid contact with substances that are hazardous to one’s health. After finishing your work, wash hands and other affected
body parts that may have come into contact, with warm soapy water.
Do not stand in water when using the inspection camera. When standing in water while working, there is a risk of electrical shock.
Magnet
Keep the magnet away from cardiac pacemakers. The magnet generates a field that can impair the function of cardiac pacemakers.
Keep the magnet away from magnetic data medium and magnetically-sensitive equipment. The effect of the magnetic can lead to
irreversible data loss.
Product Description and Specifications
Intended Use
The digital inspection camera is suitable for inspecting hard to reach locations or dark areas. After mounting the provided accessories
to the camera head, it is also suitable for moving and removing small and light objects (e.g., small screws). The digital inspection
camera may not be used for medicinal purposes. It is also not suitable for repairing pipe clogs or pulling in cables. The light in the
camera head is intended to illuminate the direct work area of the digital inspection camera and is not suitable for household room
illumination.
Product Features
The numbering of the product features refers to the illustration of the inspection camera on the graphics page.
1
Hand unit
2
Magnification button
3
On/Off button
4
Gallery/settings button (1st level) OK/delete button (2nd level)
5
Up is Up™ button (1st level) Scroll forward button (2nd level)
6
Trigger for a photo or video capture or video playback (gallery mode)
