Appliance door
en
39
Installation
During installation, make sure that the lettering "right
above" is upside down at the bottom left of both panels.
1.
Insert the lower panel at an angle towards the back
(fig. A).
2.
Slide in the middle panel (fig. B).
3.
Stick the retaining clips onto the right and left-hand
side of the panel, aligning them so that the retaining
carriers are over the screw holes, and then screw
into place (fig. C).
4.
Hook the seal in to the bottom of the panel again
(fig. D).
5.
Insert the uppermost panel at an angle to the back
into the brackets. Take care not to push the seal to
the back (fig. E).
6.
Insert the two small seals on the left and right of the
panel again (fig. F).
7.
Put the cover back in place and screw it on.
8.
Attach the oven door.
%
$
'
&
)
(
Summary of Contents for HLS79R350A
Page 2: ......
