Bosch HLS79R350A, Instruction Manual

Page: 23 / 60

PowerBoost function
en
23
Notes
■
To set a cooking time of under 10 minutes, always
touch
0
before you select the required value.
■
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
■
Select the relevant hotplate to call up the remaining
cooking time.
■
You can set a cooking time of up to
ŠŠ
minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting
1.
Touch the
0
symbol repeatedly until the
V
indicator lights up.
‹‹
lights up on the timer display.
2.
Set the desired time in the settings area.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the
0
symbol repeatedly until the
V
indicator
lights up.
Change the time in the settings area or set
‹‹
in order
to delete the programmed time.
When the time has elapsed
An audible signal sounds.
‹‹
appears on the timer
display and the
V
indicator lights up. The displays go
out after 10 seconds.
When the
0
symbol is touched, the displays go out
and the audible signal ceases.
v
PowerBoost function
PowerBoost function
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat
setting Š .
The function can be used by any hotplate provided that
no other hotplates are switched on. Otherwise
›
and
Š
will flash in the heat setting display.
Activation
1.
Select a hotplate.
2.
Touch the á symbol.
› lights up on the display.
The function is activated.
Notes
■
If a hotplate is switched on while the PowerBoost
function is active,
›
and
Š
will flash on the heat
setting display; heat setting
Š
will then be applied
automatically. The PowerBoost function will now be
deactivated.
■
In the combi zone, the PowerBoost function can only
be activated if the two hotplates are being used
independently of each other.
Deactivation
1.
Select the hotplate.
2.
Touch the á symbol.
The › display goes out and the hotplate switches
back to the Š heat setting.
The function is deactivated.
Note:
In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.