English |
9
Bosch Power Tools
2 609 932 632 | (5.6.08)
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1
Saw blade*
2
Adjustable footplate
3
Saw blade holder
4
Locking sleeve for saw blade
5
Stroke rod
6
Stroke speed selector switch
7
On/Off switch
8
Battery release button
9
Battery*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Assembly
Battery Charging
f
Use only the battery chargers listed on the
accessories page.
Only these battery charg-
ers are matched to the lithium ion battery of
your power tool.
Note:
The battery is supplied partially charged.
To ensure full capacity of the battery, completely
charge the battery in the battery charger before
using your power tool for the first time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage the
battery.
The lithium ion battery is protected against deep
discharging by the “Electronic Cell Protection
(ECP)”. When the battery is empty, the machine
is switched off by means of a protective circuit:
The inserted tool no longer rotates.
Do not continue to press the
On/Off switch after the ma-
chine has been automatically switched off.
The
battery can be damaged.
The battery is equipped with an NTC tempera-
ture control which allows charging only within a
temperature range of between 0 °C and 45 °C. A
long battery service life is achieved in this man-
ner.
Observe the notes for disposal.
Removing the Battery
The battery
9
is equipped with two locking levels
that should prevent the battery from falling out
when pushing the battery unlocking button
8
un-
intentionally. As long as the battery is inserted in
the power tool, it is held in position by means of
a spring.
To remove the battery
9
, press the battery un-
locking button
8
and pull the battery out of the
power tool toward the rear.
Do not exert any
force.
Reciprocating Saw
GSA 18 V-LI
Professional
Article number
3 601 F4J 0..
Rated voltage
V=
18
Stroke rate at no load n
0
– 1st gear
– 2nd gear
spm
spm
0
–
2400
0
–
2700
Tool holder
SDS
Stroke rate control
z
Stroke
mm
28
Cutting capacity, max.
– in wood
– in non-alloy steel
– Pipe diameter
mm
mm
mm
250
20
130
Weight according to EP-
TA-Procedure 01/2003
kg
3.4
Please observe the article number on the type plate of
your power tool. The trade names of individual tools may
vary.
WARNING
OBJ_BUCH-776-001.book Page 9 Thursday, June 5, 2008 1:27 PM
