English |
15
Bosch Power Tools
1 619 929 K79 | (12.4.12)
A battery that is new or has not been used for a longer period
does not develop its full capacity until after approx. 5 charg-
ing/discharging cycles.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Observe the notes for disposal.
Troubleshooting
–
Causes and Corrective
Measures
When the corrective measures do not eliminate an error,
please contact an authorised service agent for Bosch power
tools.
Maintenance and Service
Maintenance and Cleaning
For safe and proper working, always keep the construction
site radio clean.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
If the construction site radio should fail despite the care taken
in manufacture and testing, repair should be carried out by an
authorised customer services agent for Bosch power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the construction site radio.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Cause
Corrective Measure
Construction site radio inoperative
No power supply
Completely insert the power-
supply plug and plug-in con-
nector or the charged battery
pack
Construction site radio too
warm or too cold
Wait until the construction
site radio has reached oper-
ating temperature
Construction site radio inoperative on A/C power supply
Power-supply plug or connec-
tion cable defective
Check the power-supply plug
and the connection cable,
and have them replaced as
required
Wrong power-supply plug
inserted
Use the original Bosch power-
supply plug (also available as
spare part)
Construction site radio inoperative on DC power supply
Battery contacts
contaminated
Clean the battery contacts
(e.g. by inserting and remov-
ing the battery several times)
or replace the battery
Battery defective
Replace the battery
Battery pack too warm or too
cold
Wait until of the battery has
reached operating tempera-
ture
Construction site radio suddenly inoperative
Power-supply plug or battery
pack not properly or com-
pletely inserted
Plug in power-supply plug or
battery properly and com-
pletely
Bad radio reception
Interference from other
devices or insufficient set-up
location
Position the construction site
radio at another location with
better reception or with
greater clearance to other
electronic devices
Time indication faulty
Back-up batteries of clock
empty
Replace back-up batteries
Back-up batteries incorrectly
inserted (wrong polarity)
Insert back-up batteries
correctly
OBJ_BUCH-1619-001.book Page 15 Thursday, April 12, 2012 11:48 AM
