74
en | Configuration via the browser
FlexiDome
DN
IP
V 1.0 | 2006.12
Operating Instructions
Bosch Security Systems
2.
Click
Stop
to deactivate the recording schedule. Record-
ings that are currently running are interrupted and the con-
figuration can be modified.
7.10.2
Recording status
The graphic indicates the recording activity in this partition. You
will see an animated graphic while recording is taking place.
7.11
Alarm Settings
7.11.1
Alarm connections
You can select the response of the camera when an alarm
occurs. In case of an alarm, the camera can automatically estab-
lish a connection to a predefined IP address (compatible
MPEG-4 compatible hardware receiver or computer with recep-
tion software). You can enter up to ten IP addresses which will
be selected in order by the unit in case of an alarm until a con-
nection is established.
Connect on alarm
Select
On
so that the camera automatically establishes a con-
nection to a pre-defined IP address in the event of an alarm.
i
NOTICE!
Stream 2 is always transmitted for alarm connections. This
should be taken into account when assigning the profile.
Summary of Contents for FlexiDomeDN IP NWD-495V03-10
Page 1: ...FlexiDomeDN IP NWD 495V03 10 NWD 495V03 20 en Operating Instructions ...
Page 2: ......
Page 109: ......
