FlexiDome
DN
IP
Operation via the browser | en
33
Bosch Security Systems
Operating Instructions
V 1.0 | 2006.12
6.1.2
Image selection
You can view the image on a full screen.
–
Click one of the MPEG-4 Stream 1, MPEG-4 Stream 2 or M-
JPEG tabs below the video image to switch between the
different displays for the camera image.
6.1.3
System log / Event log
The System log field contains information about the operating
status of the camera and the connection. These messages can
be saved automatically in a file. Events such as the triggering or
end of alarms are shown in the Event log field. These messages
can be saved automatically in a file.
6.1.4
Saving snapshots
Individual images from the video sequence that is currently
being shown on the
Livepage
can be saved in JPEG format on
the computer's hard drive.
1.
Click the camera icon
to save single images.
2.
The image is saved at a resolution of 704 × 576/480 pixels
(4CIF). The storage location depends on the configuration
of the camera.
6.1.5
Recording video sequences
Sections of the video sequence that is currently being shown on
the
Livepage
can be saved on the computer's hard drive. The
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
1.
Click the recording icon
to record video sequences.
Summary of Contents for FlexiDomeDN IP NWD-495V03-10
Page 1: ...FlexiDomeDN IP NWD 495V03 10 NWD 495V03 20 en Operating Instructions ...
Page 2: ......
Page 109: ......
