Bosch FlexiDomeDN IP NWD-495V03-10 Operating Instructions Manual Download

Page: 40 / 110

en | Configuration via the browser

FlexiDome

V 1.0 | 2006.12

Operating Instructions

Bosch Security Systems

You can view the current settings by opening one of the config-
uration pages.
1.

Click one of the menu options on the left of the window.
The associated sub-menu is opened.

Click one of the links in the sub-menu. The corresponding
page is opened.

The settings are changed by entering new values or by selecting
a pre-defined value in a list field.

Saving changes

After making changes in a window, click the

Set

button to send

the new settings to the unit and save them there.

NOTICE!

Save the changes made in each window by clicking

Set

Clicking the

Set

button saves only the settings in the current

window. Changes in any other fields are ignored.

Summary of Contents for FlexiDomeDN IP NWD-495V03-10















































































































Search results

Summary of Contents for FlexiDomeDN IP NWD-495V03-10

Reviews:

Related manuals for FlexiDomeDN IP NWD-495V03-10

Brands by name

Popular brands

Bosch FlexiDomeDN IP NWD-495V03-10, Operating Instructions Manual

Search results

Summary of Contents for FlexiDomeDN IP NWD-495V03-10

Reviews:

Related manuals for FlexiDomeDN IP NWD-495V03-10

Brands by name

Popular brands