6 720 643 259 (2010/05)
Menu settings INSTALLER SETTINGS (for installers only)
|
41
US/CA
8.7 Viewing system information
Installer settings: System info
Menu structure
Æ
page 34.
Shows a variety of system information:
•
Boiler part number
(fixed setting from boiler)
•
Boiler date of manufacture
(fixed setting
from boiler)
•
Controller part number and model
(fixed
factory setting)
•
Controller date of manufacture
(fixed factory
setting)
•
Controller software version
(fixed factory
setting)
8.8 Test of the actuators on the
system
INSTALLER SETTINGS: Output test
For menu structure and adjustment range
Æ
page 34.
The
Output test
menu gives you the opportunity
to activate individual actuators (pumps, mixing
valves) individually to check their function.
•
Stop all output tests
: Use this parameter to
reset the activation of all actuators to
Auto
.
•
Heating circuit pump
:
–
Auto
: Control of the pump according to the
set program
–
Manual ON
: Pump always on
–
Manual OFF
: Pump off
•
Heating circuit mixer
:
–
Auto
: Control of the mixing valve according
to the set program
–
Manual 100 % open
: Mixing valve in open
position
–
Manual 50 % open
: Mixing valve in middle
position
–
Manual 0 % open
: Mixing valve in closed
position
As long as one or several actuators
are activated manually, a
corresponding message will be
shown on the display.
