Bosch DVR-451-04A050 Installation And Operation Manual Download Page 66 | Manualshive

Page: 66 / 86

background image

Video Recorder 400 Series

Web Client Software | en

66

Bosch Security Systems

Installation and Operation manual

F.01U.168.054 | v1.1 | 2010.06

7

Web Client Software

The Web Client Software gives full remote control of the DVR 400 Series using a PC. Up to
four remote users can access and control the unit. Remote live viewing, search, playback, and
system configuration are provided. Remote control functions include pan, tilt, and zoom
control of cameras, and video archiving. An on-line status overview of the connected unit is
also provided.
To access a unit, a user must log on using the same User ID and Password used for local
access. The Web Client will follow the permissions of the user account, restricting the
functions available to each remote user; for example, the ability to archive video. See

Section 5 Operating instructions, page 27

chapter for more details on User Levels.

7.1

Getting started

To use the Web Client, the unit and the PC must be able to connect via a TCP/IP network
connection. Follow the instructions in

Section 6.5 Network, page 58

to ensure the unit can be

reached on the Network.

7.1.1

System requirements

Operating platform: A PC running Windows XP, Windows Vista, or Windows 7.
For the Configuration Tool, the

recommended

PC requirements are:

–

Processor: Intel Core Duo, 2.0 GHz or comparable

–

RAM memory: 2048 MB

–

Free hard disk space: 10 MB

–

Graphics card: NVIDIA GeForce 8600 or higher

–

Network interface: 10/100-BaseT

–

Web Browser: Internet Explorer 7 or later

7.1.2

Connecting to the DVR 400 Series the first time

The video decoder and playback controller is automatically installed on the PC the first time
the user connects the PC to the DVR:
1.

Open Internet Explorer.

2.

In the address bar, type the address of the unit.
–

This can be either the IP address or a DDNS address, if enabled on the unit.

3.

Internet Explorer will prompt to install the OCX software that is used to show live and
playback video.

4.

Once installed, the screen will refresh and prompt for a User ID and Password.
–

Once installed on a PC, the Web Client will not need to install the OCX again unless
a new version is released with a new unit firmware.

«
...
64
65
66
67
68
...
»

Summary of Contents for DVR-451-04A050























































































Reviews:

No comments

Related manuals for DVR-451-04A050

Brand: CAST Information Co., Ltd. Pages: 59

Brand: Lorex Pages: 84

Brand: XtendLan Pages: 148

FlexWATCH FW5870

Brand: Seyeon Technology Pages: 14

JPEG2000 Triplex

Brand: Omega Power Equipment Pages: 44

Brand: COP Security Pages: 28

INSPIRE WHITE series

Brand: COP Security Pages: 36

Brand: IMS Pages: 55

Brand: Planet Pages: 3

Brand: Marine PC Pages: 64

EVD-16/400A16HC

Brand: Euro Video Pages: 117

EVD-16-400AxxHN

Brand: Euro Video Pages: 144

Brand: Rialtrade Pages: 111

Brand: Cabletech Pages: 79

New Prestige 04

Brand: APPENDIX Pages: 130

Brand: Encore Pages: 11

Brand: Encore Pages: 16

Brand: Elvox Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands