Bosch DVR-451-04A050 Installation And Operation Manual Download Page 64

Page: 64 / 86

Video Recorder 400 Series

Configuration menu | en

Bosch Security Systems

Installation and Operation manual

F.01U.168.054 | v1.1 | 2010.06

6.6.6

Hard Disk

Figure 6.21

System - Hard disk

The Hard Disk menu gives access to settings that affect video retention as well as a means to
format the hard disk.
–

Overwrite

allows the unit to continuously record, overwriting the oldest unprotected

video on the hard disk with newer video.

–

The

Disk full warning

sets the threshold as which point the unit triggers an alarm

indicating the drive is nearly full. This setting has no effect when Overwrite is in use.

–

The disk can be segmented into two partitions. The normal partition stores video from
Continuous Recording. The

Event Partition

specifies the percentage of the hard disk

dedicated to preserving video from Inputs and Motion.

–

Auto delete

sets a time window outside of which all video will be deleted from the unit.

This function is primarily reserved to meet legal requirement in some jurisdictions.

–

Format

erases all data from the selected partition.

Summary of Contents for DVR-451-04A050























































































Search results

Summary of Contents for DVR-451-04A050

Reviews:

Related manuals for DVR-451-04A050

Brands by name

Popular brands

Bosch DVR-451-04A050, Installation And Operation Manual

Search results

Summary of Contents for DVR-451-04A050

Reviews:

Related manuals for DVR-451-04A050

Brands by name

Popular brands