Bosch DCN-SWSACC Software Manual Download Page 22

Page: 22 / 28

en | Warning and error reports

Bosch DCN Standalone Automatic Camera

Control

DCN-SWSACC_V4.0 | V1.0 | 2011.10

Software Manual

Bosch Security Systems B.V.

Error

Error issued on start upload when the DCN-SWSACC application has

loaded a single CCU configuration, while it connects to a Multi CCU

DCN system.

Icon

Main instruction

The configuration can not be uploaded. What do you want to do?

Content

This configuration is not intended to be used with the connected

DCN system. The configuration is intended for a single CCU DCN

system, while you are connected to a multi CCU DCN system.

Command links

Open another configuration
Continue using the active configuration

Button

Don’t Upload

Error

Error issued on start upload when the DCN-SWSACC application has

loaded a multi CCU configuration, while it connects to a single CCU

DCN system.

Icon

Main instruction

The configuration can not be uploaded. What do you want to do?

Content

This configuration is not intended to be used with the connected

DCN system. The configuration is intended for a multi CCU DCN

system, while you are connected to a single CCU DCN system.

Button

Don’t Upload

Error

Error issued on start configuration when the DCN-SWSACC

application has loaded a single CCU configuration, while it connects

to a multi CCU DCN system.

Icon

Main instruction

The configuration can not be started. What do you want to do?

Content

This configuration is not intended to be used with the connected

DCN system. The configuration is intended for a single CCU DCN

system, while you are connected to a multi CCU DCN system.

Command links

Open another configuration
Continue using the active configuration

Button

Don’t Start configuration

Error

Error issued on start configuration when the DCN-SWSACC

application has loaded a multi CCU configuration, while it connects

to a single CCU DCN system.

Icon

Main instruction

The configuration can not be started. What do you want to do?

Content

This configuration is not intended to be used with the connected

DCN system. The configuration is intended for a multi CCU DCN

system, while you are connected to a single CCU DCN system.

Command links

Open another configuration
Continue using the active configuration

Button

Don’t Start configuration

Summary of Contents for DCN-SWSACC





























Search results

Summary of Contents for DCN-SWSACC

Reviews:

Related manuals for DCN-SWSACC

Brands by name

Popular brands

Bosch DCN-SWSACC, Software Manual

Search results

Summary of Contents for DCN-SWSACC

Reviews:

Related manuals for DCN-SWSACC

Brands by name

Popular brands