Bosch DCN-SWSACC, Software Manual

Page: 21 / 28

Bosch DCN Standalone Automatic Camera
Control
Warning and error reports | en 21
Bosch Security Systems B.V. Software Manual DCN-SWSACC_V4.0 | V1.0 | 2011.10
9 Warning and error reports
This section summarizes the warnings and errors and provides the text actually shown.
Warning Warning when the application exits while configuration process is
active.
Icon
Main instruction Do you want to save the configuration before application exit?
Content The configuration process is still active.
Command links Save and exit
Exit without saving
Button Cancel
Warning Warning when the application exits that the configuration is changed
but not yet saved.
Icon
Main instruction Do you want to save the configuration before application exit?
Command links Save and exit
Exit without saving
Button Cancel
Warning Warning when the file opened can not be read (corrupt, empty, read
fail).
Icon
Main instruction The file {0} can not be opened or is corrupt.
Content The file can not be opened. Do you want to open a new file?
Buttons Open a new file
Don’t open a new file
Error Error issued when the connection with the DCN system can not be
established.
Icon
Main instruction Check your connection with the DCN system.
Content Can not establish the connection with the DCN system. Check the
protocol and baudrate settings on the DCN system. Connection to
the DCN system might be occupied by the DCN-SW server or the
Download and License Tool.
Button OK
Footer icon Information
Footer <a href="Installation.htm">Learn about connecting the DCN
system.</a>
Error Error issued when the DCN system has incompatible Software
version installed.
Icon
Main instruction Check the version of your DCN system.
Content The DCN system with version {0} does not match the version of the
DCN-SWSACC application. Update your DCN system to at least
version 2.60.xxxx by using the Download and License Tool.
Button OK